Eşyalarını Tamir Et Topluluk Mağaza

Second generation of Wi-Fi iPad, released on March 11, 2011. Model number A1395. Repair is difficult and will require heat.

250 Soru Tümünü görüntüle

Seçenekler

Ipad 2 does not charge even do the charging dock has been replaced

I am trying to repair an Ipad 2. The original issue was that it was not charging because it falls down.

In the first review, the charging dock looks broken from the outside, so I proceed to replace it.

But now, with the new dock, the Ipad still not charging. (there are no signs of the charging icon and it does not turn it on when the charger is connected)

When I connect the charger, it seems not to do anything.

The LCD works, the Home button works, but there is a problem with the Power button.

It does not work when pressing it.

Some ideas or where shuold I review?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

It is possible that the replacement flex you installed is also defective; small parts tend to have higher failure rates. Otherwise, closely inspect the connector on the logic board.

Does it get recognized by iTunes when you connect it?

If it still won't charge but is recognized by iTunes, then it may be an issue with the actual charge circuit.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

4 Yorum:

First of all, thanks for your answer.

Answering your questions, the iPad is not recognized by iTunes when connected.

But I also notice that if I left the iPad charging the charging icon does not appear, but the iPad charge in a very slow way. (I left it all the night and charge like 50% more)

Do you think that the flex replacement is defective? Or should I review something else?

Thank you very much

tarafından

How are you charging the iPad? Via a computer, a small charging brick (like the iPhone) or the larger charging brick?

tarafından

With the larger one.

tarafından

Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows). It will tell you what the health of the battery is. Anything less than 70% of design capacity will require replacement.

tarafından

Yorum Ekle

Yanıtını ekle

Diana Vargas sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 7

Her zaman: 66