Ana içeriğe geç

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

105 Soru Tümünü görüntüle

Partially dead after replacing LCD and digitizer.

I have a problem with my iPad 3 4G.

After replacing LCD and digitizer, iPad "won't boot" up. The device looks like dead (LCD and digitizer isn't working, no sound when connected to the power supply), but after connecting to a computer, I can still sync files and charge the battery. I tried to reset (buttons still works), restoring to factory settings etc., but nothing works. I remember, when the screen was plugged out, I felt a smell from the motherboard. Is it possible to burnt something?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

Unfortunately yes, unusual smell or noise coming from the board probably involves a shorted component, in this case, since the iPad is still recognised by Itunes it might mean something got burnt along video or backlight circuits. You'll need somebody specialized in microsoldering to take care of it, but given today's market prices for an iPad 3 it might be economically questionable.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Yanıtını ekle

Keith Baudelaire sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 27