Ana içeriğe geç

Repair and disassembly guides for Epson printer.

413 Soru Tümünü görüntüle

All lights are blinking, and tryied to reset with epson adjustment

I have an Epson TX105. It was my fault, paper got stuck (that wasn't my fault) and I removed it (that was my fault)

now all the lights are blinking, and I don't know what else to try.

Thinks I tried:

Take out power supply

using epson adjustment tried almost every test and all failed to fix it

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 23

Yorumlar:

Clean the printer from inside and put some silicone oil on the bar on which head moves

tarafından

is there anybody can help my problem… I have Epson L405 is now PAPER JAM , i’m trying to follow the instruction but still have a problem still blinking the Paper Jam indicator.

tarafından

is there anybody can help my problem… I have Epson M105 is now PAPER JAM , i’m trying to follow the instruction but still have a problem still blinking the Paper Jam indicator.

tarafından

Epson L805 me red light bling kar raha h,

Colour khatam ho gaya tha fir colour dala hu fir bhi print nahi ho pa raha h please help me..

tarafından

Hi I have Epson L380 Printer is showing End of Life Inkpad...

tarafından

3 daha fazla yorum göster

Yorum Ekle

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

MacBook Pil Tamir Setleri

Başlangıç $69.99

Buy Now

10 Cevap

Filtre ölçütü:
Seçilen Çözüm

All lights flashing is called a "Fatal Error" This is PER EPSON. I use to see this weekly from people that had a paper jam. When you un-jam the paper, I'm guessing you pulled it out the way it went in. What happens when you do this, is you actually pull the paper sensor out of it's cradle. Therefore it sees that the sensor is not functioning properly, giving you a fatal error. If I remember correctly it is quite a pain to get the sensor back where it belongs. IF you are mechanical and want to give it a try, just be careful and remember where everything goes. Write it down or something.

Look into the slot where you feed the paper in. you may be able to see the sensor with a flashlight. It's impossible for me to walk you through this, but if you want to try, now you know what to look for.

If this was an inexpensive printer. ($50-$60) Personally, I would get another printer instead of trying to fix it. From a service point of view, the labor to fix this if you brought it into my shop would be more than a new printer. Providing it was a cheaper model.

Bu yanıt yardımcı oldu mu?

Puan 18

Yorumlar:

I had a fatal error too but it was not related to the paper in my case. All I had to do with mine was change one of the cartridges, even though it still had some ink in it. Wasn't using the original cartridges and I'm still not using the original cartridges, but at least now it's working.

tarafından

My Epson L210 blinking red light and say for ink ped services

tarafından

my epson l220 2 red lights blinking, green one blinking also. I cant print, this happened when my printer ran out of paper. and now when i put it on it makes a noise and the lights starts to blink. i have tried a lot of things but nothing helps

tarafından

my epson l130 red light blinking grenn on also .

tarafından

How to rest Inkpad error is showing End of life rest inkpad

tarafından

2 daha fazla yorum göster

Yorum Ekle

sir.....i am problem is two lights on this printer ink and pad lights on off continuesaly

this solved my question

Bu yanıt yardımcı oldu mu?

Puan 12
Yorum Ekle

my problem is epson l210 model its 2 light bling king alternet

Bu yanıt yardımcı oldu mu?

Puan 4

Yorumlar:

epson l380 page and ink lagthe show

tarafından

Yorum Ekle

sensor is not work. please replace the sensor.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

i have epson l805 and all lights are blinking and not taking paper in what to do?

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

Workforce K101 - Deep paper jam issue caused ALL BLINKING LIGHTS on EPSON WORKFORCE K101. Checked for paper on the print path... SOLVED ISSUE.

Bu yanıt yardımcı oldu mu?

Puan 2
Yorum Ekle

You can try with this guide: How to Hack Epson L200's Waste Ink Pad

Bu yanıt yardımcı oldu mu?

Puan 2

Yorumlar:

My name is Ben. I bought an Epsom aculaser m2400dn from jumia Nigeria and I received it on Tuesday 24/7/2018. I installed it but it was given me General Error E004 and the lights were blinking. Please guide me on how to fix the problem.

tarafından

Yorum Ekle

i have epson lx310 and all lights are blinking what to do?

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

i have epson l380. both red light blinking. what should i do ?

Bu yanıt yardımcı oldu mu?

Puan 1

Yorumlar:

I have Epson L130 when i switch on the printer roller moving very fastly like fan speed and all three lights are blinking

tarafından

Yorum Ekle

My one L355 got the "fatal error" after print head replacement :/ I still can "print" though, but only blank paper is coming out. Printer behaves as if it was printing but just all lights are blinking and no ink on paper.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

My printer is Epison Artisan 1450 Series it has reached a point where it prints slowly as if it is thinking whether to print or not, Currently, it has stopped printing. it is leaking a blackish oil like and at the same time it is blinking. when i restart the printer it displays a massage "Printer Busy" yet no printing job in the qeue. please help am stuck

tarafından

Yorum Ekle

Yanıtını ekle

Alvaro sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 123

Son 7 Gün: 703

Son 30 Gün: 3,438

Her zaman: 154,108