Ana içeriğe geç

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Soru Tümünü görüntüle

After replacing battery, touch screen does not work

Hi

I used your iPhone 5 battery replacement kit and seemed to do everything fine during the steps. Now there is no sensitivity on the screen, can’t touch to select top row of icons, can’t swipe to turn off, etc. Just in the top part of the screen. Any ideas what has gone wrong?

Thanks

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

"Just in the top part of the screen"?

You could try re-seating it but that might be a bad part

Bu yanıt yardımcı oldu mu?

Puan 0

2 Yorum:

Hi, thanks for your suggestion. I tried resetting but still did not fix. Unfortunately the touch screen is even worse now and most of the sensitivity, or ability to touch icons or swipe, has gone from most of the screen. Or I touch an icon on the bottom row to open an app, and it opens an icon on the top row!

tarafından

If you still have it, you could try reconnecting your old screen to see if it still works for touch (assuming you replaced it because it was cracked). If it works ok then you might have gotten a replacement screen and in that case I'd contact the seller to discuss warranty.

There's really only two things it could be - either the screen or the logic board. If you can rule out the screen, then you could probably replace the device for less than it would take to have someone repair the logic board

tarafından

Yorum Ekle

Yanıtını ekle

K G sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 9

Her zaman: 77