Seçenekler

After Screen and battery Replacement the screen became unresponsive

Hi,

I got a serius problem with my iphone 6 Plus. After screen and battery replacement the screen became irreponsive. I can not touch any number to unlock the inital screen., they dont respond at all. It seems to be working fine but I can not access to the phone because i can not touch it.

What happened? Could be touch IC on the logic board problems? The phone was working fine before the replacement.

I replaced back the old screen and it does the same. The screen doesnt respond.

I really appreciate any help guys.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

2 Yorum

What do think about this solution @refectio ? Could it work? https://www.youtube.com/watch?v=yUUfTzag...

Fernando tarafından 24 Kas 2018

This is a kludge, not a fix...It only makes the root cause worse. Check out the blog post I linked below, it explains the issue in detail.

Minho tarafından 24 Kas 2018

Yorum Ekle

Gönderildi: 23 Kas 2018

Seçenekler

It’s most probably Touch Disease. This was probably a latent issue and torquing the device to do the repair was probably the proverbial “straw”.

If you want to know for certain, you would want to test your screens on a known-good device but this isn’t always practical for a DIY fixer. Double check the connectors on the logic board to insure you haven’t damaged them. If they are in good condition, then it’ll require a micro-soldering repair.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 4

Yorum Ekle

iPhone 6 Plus

After Screen and battery Replacement the screen became unresponsive

1 Cevap

Yanıtını ekle