Ana içeriğe geç

Nintendo's upgraded version of the Nintendo 3DS. It features bigger screens, longer battery life, and a better design.

354 Soru Tümünü görüntüle

Can I unbrick my 3DS XL?

Two years ago, I tried to install something on my 3DS because I got a game from a friend that wasn’t compatible with my console. I found this guide https://3ds.hacks.guide/ and while following it, my 3DS stopped working. When I try turning it on, the screen stays black, but the blue light flashes once for like a second . I made some researches and it turned out that I apparently bricked my console? I was only 16 when I did this and was just so desperate to play Tomodachi life I had got from my friend, I didn’t really know what I was doing. I’m not really an expert at modding and such things, but I would really be happy if I could get my console to work again.

I dindn’t make a back up and I used the SD card that was in the 3DS when I got it which might also not have been the best move? Is there any hope left for my nintendo?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

I got a similar problem when the screen was bent too far backwards, and cannot get the system open because the screws are stripped. The console turns on for about three seconds, then shuts down. Activating a calibration function makes it stay on for about a half-second more. The system only stopped working after the lid was closed.

tarafından

Yorum Ekle

4 Cevap

Filtre ölçütü:
En Yararlı Yanıt

I know I am like a year late but to anyone having this issue: You need to download the latest version of Luma3DS and extract it to the root of your sd card. Make sure the boot.firm is on the root. Replace any files if it asks to.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Try removing everything in the "sd://luma" folder and then getting the latest "arm9loaderhax.bin". Then boot into the config menu.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

you are still facing this issue

tarafından

Yorum Ekle

Try Holding L, R, A, and Up (on the directional pad, not the circle pad), then performing a system update. This fixed a “soft-bricked” 3DS. If this does not work, you may have to insert the SD card into a computer and perform a specific procedure for “hard-bricked” 3DS consoles. I found this on YouTube long ago. If you wish, you may click here for a video clip I have found, but not yet reviewed due to it being blocked.

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

This is a problem with CFW, not his 3ds. He doesn't have a hard brick or soft bricked console. He just forgot some files on his SD card lol

tarafından

@johnodon Not to be rude, but he claimed that he forgot to back up his files, not that he forgot any. He may get a fix for this, but it is the best answer that I can give. The update may fix the firmware issue. Thanks for the comment!

tarafından

@michaeld2 Not to be rude, but my answer linked him all the files he needed, which were listed on the guide.

tarafından

@johnodon Your answer may be more helpful than mine. I am thankful for your contribution.

tarafından

Yorum Ekle

Yes go to stchix on YouTube for proper guide

Bu yanıt yardımcı oldu mu?

Puan -1
Yorum Ekle

Yanıtını ekle

julie sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 11

Son 7 gün: 103

Son 30 gün: 586

Her zaman: 8,667