Eşyalarını Tamir Et Topluluk Mağaza

Fare, klavye ve monitör gibi çalışması için gereken üçüncül bileşenlerin dışında ana bileşenleri ayrı bir kasada bulunan, sabit, kişisel masaüstü bilgisayar.

542 Soru Tümünü görüntüle

Seçenekler

micro SD Card write protection

It might be stupid question to someone but this is bothering me for a gooood while.

If micro SD card inserted into say Samsung tablet and formatted I can not find any way how to reformat it back on windows! but if you insert the same card say in dash cam or other device sure it can be formatted with no issues but when inserted into PC is the same $@$* - you can only access files but not format the card as its write protected! HELP PLEASE…

I have few micro SD cards and this is really annoying as I need one to use with Windows PC..

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Insert the SD card into your PC's card reader. Open a Command Prompt as administrator. Type "diskpart" and hit RETURN. When diskpart has loaded, type "list disk" and hit RETURN. Look for the drive entry that's your SD card (compare the capacities) and note which disk number it is.

IT IS CRITICALLY IMPORTANT THAT YOU SELECT THE RIGHT DISK NUMBER BECAUSE YOU WILL BE COMPLETELY ERASING THAT DISK IN THE NEXT STEP.

Type "select disk #" with # being the disk number of your SD card and hit RETURN. Type "clean" and hit RETURN. This will remove all partition and formatting information from the SD card. When it's done type "exit" and hit RETURN, then close the Command Prompt window.

Eject the SD card, then reinsert it and Windows should prompt you to format it.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

4 Yorum:

Thanks Steve for your suggestion but I have tried many things including the one you have mentioned - it comes with -

'DiskPart has encountered an error: The request could not be performed because of an I/O device error.

See the System Event Log for more information.'

My cards is 100% genuine high speed SanDisk and 100% working with 100% capacity....

tarafından

Sounds like a problem with your PC's card reader then. Do you have a card that's already formatted for Windows? If so, put it in, verify that it works, then try the diskpart/clean/format process with it. If it fails then your issue is with your PC, not with the cards.

tarafından

OMG it is sorted! Apparently I have specific card reader which is protecting data I totally forgot about it! I just used USB card reader and formatted with no problems. You are STAR ! Thank you Steve!

tarafından

Darius, If Steve's contribution helped you solve your problem, you should select this answer as the solution.

tarafından

Yorum Ekle

Seçenekler

Hi Darius,

This comment should be in “Answer”

OMG it is sorted! Apparently I have specific card reader which is protecting data I totally forgot about it! I just used USB card reader and formatted with no problems. You are STAR ! Thank you Steve!

2 hours ago by Darius

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Actually Mike, the proper answer should be the one from @secondlife as he initiated the process that led to the solution.

tarafından

Yorum Ekle

Yanıtını ekle

Darius sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 14

Her zaman: 648