How to get my iPhone 7 out of bootloop bootloop

Question

iPhone 7

16 Eylül 2016'da satışa sunulmuştur. Model 1660, 1778 GSM ya da CDMA olarak 32, 128 ya da 256 GB kapasitelerinde ve Altın Gülü, altın, gümüş, siyah ve simsiyah renklerinde satılır.

20 Soru Tümünü görüntüle | 79 Parçalar Mağaza

Abbaas Shazad @abbaas

İtibar: 11

1

Gönderildi: 5 Nis 2019

Seçenekler

How to get my iPhone 7 out of bootloop bootloop

Hi,

i bought an iPhone 7 about a year ago with the intention to change the housing as I had successfully done previously.i replaced the housing albeit with a few hiccups, until I turned it on. It is in a continuous bootloop until I power it off with the volume down and power button. I replaced the dock connecter and it booted but my Taptic Engine stopped working (wish I left it now). I discovered that the phone only boots if I have installed the dock connected temporarily on the top of the logic board. But if put the working dock connecter under the logic board as it should be it doesn’t boot just loops

Can anyone give me some help?

Everything is appreciated?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

2 Cevap

Seçilen Çözüm

chris @bobcat1981

İtibar: 1,8b

3

Gönderildi: 5 Nis 2019

Seçenekler

im guessing the charge port flex isn't connected properly, it`s easy to not get it square with the connector which results in it not seating correctly, apple though have left two white dots on the shell which need to be aligned with the two holes in the charge port flex, get these lined up and it makes connecting it a breeze. make sure the connector is flush and not sitting proud at one end or you endup with the problem your having.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

3 Yorum:

That’s my problem. But I’ve changed the housing with a third party one. And now when I connect the lightning dock it just sits up at one end

Abbaas Shazad tarafından 5 Nis 2019

So I can’t see the dots

Abbaas Shazad tarafından 5 Nis 2019

I haven’t updated this in a while but I ended up sending it to a warehouse I have a connection with and they seated it properly. The connector was as said above not placed properly and just needed to be put in the correct place. Thanks for all the help!

Abbaas Shazad tarafından 9 Nis 2020

Yorum Ekle

That’s my problem. But I’ve changed the housing with a third party one. And now when I connect the lightning dock it just sits up at one end — Abbaas Shazad
I haven’t updated this in a while but I ended up sending it to a warehouse I have a connection with and they seated it properly. The connector was as said above not placed properly and just needed to be put in the correct place. Thanks for all the help! — Abbaas Shazad

Minho @refectio İtibar: 221,8b 15 297 808 · Answer 1 · 2019-04-05T11:20:46-07:00

En Yararlı Yanıt

Minho @refectio

İtibar: 221,8b

15

297

808

Gönderildi: 5 Nis 2019

Seçenekler

You may have accidentally damaged the Lightning Flex during removal. Closely inspect it and look for signs of damage such as a tear, connector damage or exposed traces. Conversely, look at the logic boar das well, particularly in the the area near the Lightning Port connector.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 1

1 Yorum:

It works when it’s not set in place so it’s not the connector. And I’ve tried 4 connectors and they all work when not in place

Abbaas Shazad tarafından 5 Nis 2019

Yorum Ekle

iPhone 7

How to get my iPhone 7 out of bootloop bootloop

2 Cevap

Yanıtını ekle