iPad Mini 4 - Screen/Digitizer not seating correctly.

Question

iPad mini 4 Wi-Fi

iPad Mini 4— A1538 modelinin Wi-Fi versiyonu için kılavuzlar. 9 Eylül 2015'te duyurulan iPad Mini 4, iPad Mini 3 modelinin yenisidir.

97 Soru Tümünü görüntüle

Jacob @militiatech

İtibar: 11

Gönderildi: 29 Nis 2019

Seçenekler

iPad Mini 4 - Screen/Digitizer not seating correctly.

Hey all, New to the forums and new to working on a iPad Mini 4 reassembly. We had to replace a digitizer that was cracked with a brand new one, my only issue with it is trying to close the whole thing back up. Currently the issue persists near the bottom right hand corner of the screen but it can be the top right hand corner as well (Its usually on the right hand side.) My Theory is that the cables that attach from the digitizer and the board are not wanting to seat correctly and keeping the screen popped up. Attached with this post is a image of said iPad Mini 4, any help would be appreciated.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 0

Yorum Ekle

1 Cevap

Seçilen Çözüm

Gorilla @xingxing

İtibar: 1,7b

7

6

Gönderildi: 29 Nis 2019

Seçenekler

Your theory is on point - cable is not folding in the right direction causing screen not to sit flush, you may also want to remove old adhesive and use Tesa 61395 tape, this is currently the best adhesive for screen repair.

Tesa 61395 Tape

@refectio wrote a great guideline for iPad screen repair, check out his answer in this post:

After doing my repairs (battery and screen) I have problems

Ürün

Tesa 61395 Tape

$5.99

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 2

2 Yorum:

For the Digitizer cabel itself, besides making sure its folded right, is there any other way to secure it say with kapton tape or double sided tape to make sure it just stays in place?

Jacob tarafından 29 Nis 2019

@militiatech I don't believe taping is necessary if cable is properly folded and seated (it's a flex cable after all). That said, secure it with kapton tape or double sided adhesive won't do any harm and will hep securing it to some extent.

Gorilla tarafından 29 Nis 2019

Yorum Ekle

For the Digitizer cabel itself, besides making sure its folded right, is there any other way to secure it say with kapton tape or double sided tape to make sure it just stays in place? — Jacob
@militiatech I don't believe taping is necessary if cable is properly folded and seated (it's a flex cable after all). That said, secure it with kapton tape or double sided adhesive won't do any harm and will hep securing it to some extent. — Gorilla

iPad mini 4 Wi-Fi

iPad Mini 4 - Screen/Digitizer not seating correctly.

1 Cevap

Tesa 61395 Tape

Yanıtını ekle