Eşyalarını Tamir Et Topluluk Mağaza

Released June 2017, the iPad Pro 10.5" replaces the 2016 iPad Pro 9.7".

145 Soru Tümünü görüntüle

Seçenekler

Glass/display perfect, but touch is wonky, what part do I buy?

Not sure what caused it but my iPad Pro has some areas (left side of screen) where touch is 100% unresponsive. In all other areas there are no issues at all. The front glass is in perfect condition, the display is also perfect, no dead pixels or anything going wrong. Would the digitizer be the part I should buy and replace ? All the standard, shut off, restart, etc methods already have been attempted.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Touchscreen panel is acting up and causing ‘dead spots’ on random areas of display.

Digitizer and LCD screen are fused on iPad Pro 10.5” - separation/bonding requires special tools which I don’t believe is a cost effective method for consumers to go for.

If you are going to perform this repair yourself, I recommend buying digitizer/LCD assembly instead - you’ll save a lot of time and $.

Do take time to read this detailed guidelines written by @refectio for DIY repairs (scroll down to answer):

After doing my repairs (battery and screen) I have problems

This is iFixit guide on screen replacement:

iPad Pro 10.5" Screen Replacement

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Review this and see if you can solve it with what they talk about: https://www.macworld.co.uk/how-to/iphone...

Otherwise try taking the display off and cleaning the glass on the inside. If that does nothing then yes the digitizer is the part that does that, so that would need to be replaced.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Cv Neko sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 326