Eşyalarını Tamir Et Topluluk Mağaza

Devices that create three-dimensional objects from digital files through additive processes using various materials such as plastic, metal or resin.

71 Soru Tümünü görüntüle

Seçenekler

No clue how to get proper values for the thermistors.

Hihi! haven’t been here in quite a while.

Anyway, I’ve got a problem. I cannot seem to figure out the proper values for the thermistors in my 3D printer.

I have spent a few hours researching, and found I need a Beta Value and an R value. I know the thermistors are 100kOhms. (according to Reddit, https://www.reddit.com/r/3Dprinting/comm... ) And according to Marlin Firmware tables for said thermistor, it has these values:

Block Image

Using the values of

“M305 P0 T100000 R1000 B4200 ; Set thermistor + ADC parameters for heater 0

M143 H0 S120 ; Set temperature limit for heater 0 to 120C

results in tempature readings of 38C when it should be roughly 22C

Hopefully I phrased this in a way thats not as confusing as it is to me.

Any help is appreciated.

Thanks!

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

I figured it out. There was a preset option you could select and with a little editing to it I was able to make it work. here are the Sensor Values that are working:

100kOhm Thermistor

Beta: 3988

R: 2200

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle
En Yararlı Yanıt

Seçenekler

@captainsnowball brother you are not giving us much to work with here:-) No pictures of the part? Good to see you on here. Anyhow, the thermistor you are looking for should be a B57560G1104F000 - Thermistor, NTC, 100 kohm, B57560G1 Series, 4092 K, Through Hole, Radial Leaded. Here is the datasheet NTC thermistors for temperature measurement, glass-encapsulated sensors, standard type

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 2

2 Yorum:

Thanks! I'll look into that tommorow afternoon. I'll update with pics as well if I have no luck.

tarafından

@captainsnowball no worries about the pics. Take your time and focus on getting the part. Best of luck to you. Don't be a stranger.

tarafından

Yorum Ekle

Yanıtını ekle

Aiden sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 10

Her zaman: 765