Ana içeriğe geç

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

129 Soru Tümünü görüntüle

Missing socket for WiFi antenna cable from iPad Air 2

While prying off old antennae cable from socket during WIFI antennae replacement of iPad Air 2, socket was accidentally removed from board. Is there a replacement part of some way to fix this?

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

Could you add a picture or two?

by

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

There are really two options for this:

  • Order a replacement iPex antenna socket and attempt to solder the replacement to the logic board (I would order a wifi card with the same socket and transfer the connector)
  • Strip back the antenna wires and solder them directly to the logic board.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Thank you so much for this!

Bu yanıt yardımcı oldu mu?

Puan 0

Yorumlar:

I’m having a hard time finding a replacement SOCKET for this. I’m only finding the same piece I’ve already replaced ‘WIFI antenna and GPS ANTENNA FLEX CABLE REPLACEMENT’ which does not include the socket. Do you have any suggestions? Do you have any videos on soldering the wires to the board directly (missing socket)?

by

Yorum Ekle

I haven’t had success downloading a pic to share.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Mary Jo Webb sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

Her zaman: 34