No Touch after Screen remplacement
IPad Pro 12.9
I remplace the screen and batteries and and the touch screen wont working…
Connectors ok, battery 100%, screen ok but no touch….
i need help
TY Michel
Bu iyi bir soru mu?
Puan
1
617407
1 Cevap
Seçilen Çözüm
İtibar: 221,4b
15
289
807
You either have a defective replacement screen or you damaged something during the repair. Go back through the guides and double check all the steps.
Try these steps:
- Double check that the flex connectors are properly seated
- Visually inspect, preferably with magnification, the condition of the connectors on both the flex cables and the logic board
- Also look to see if any components appear missing or damaged
- Try connecting the original screen to see if the problem is consistent with the screen or logic board.
Bu yanıt yardımcı oldu mu?
Puan
1
Thank you, for the answer, i have the same pb with the original screen. So i will checked all connectors on the motherboard.. to be continued...
