ÇÖZÜLDÜ: Not turning on after chargng, turns hot though. - iPod Nano 2nd Generation

Not turning on after chargng, turns hot though.

I connected my Ipod 2nd Gen 8GB for charging and left it connected to the laptop for 3-4 hours. It was charging fine, but when i went to unplug it, it was hot on the back side and wouldn't turn on.

I tried resetting it but no go.

I connected via usb and tried a reset, no go.

I tried electric adapter (wall connector) then reset it but no go.

Now when i connect it to the electric adapter the back side does get hot (right behind the wheel).

Is the battery fried ?

How can i verify that ? (i can manage a little bit if electronic repair & i have a soldering iron too).

Thanks in advance for your response.

Gönderildi: 12 Eyl 2011

Seçenekler

It's quite possible that it could indeed be the battery. According to our teardown the battery is located directly behind the click wheel.

I had a similar incident happen to me with a rechargeable battery for my mouse. The lithium ion pack got really hot and swelled up a bit. Does your iPod look swollen on the back at all?

The good news is that it's relatively inexpensive to replace the battery for that model. It looks like we have some extra batteries in stock and we've got a guide for replacing the battery. It's not for the faint of heart (you need to do some soldering), but you sound like you can handle it.

Good luck!

Ürün

iPod nano (2nd Gen) Battery

$13.99

iPod Nano 2nd Generation Battery Görseli

Kılavuz

iPod Nano 2nd Generation Battery Replacement

Zorluk:

Çok zor

—

45 minutes - 2 hours

Kılavuz

iPod Nano 2nd Generation Teardown

Zorluk:

Çok kolay

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 2

Yorum Ekle

iPod Nano 2nd Generation

Not turning on after chargng, turns hot though.

1 Cevap

iPod nano (2nd Gen) Battery

iPod Nano 2nd Generation Battery Replacement

iPod Nano 2nd Generation Teardown

Yanıtını ekle