Eşyalarını Tamir Et Topluluk Mağaza

1.8GHz dual-core Intel Core i5 (Turbo Boost up to 2.8GHz) with 3MB shared L3 cache

371 Soru Tümünü görüntüle

Seçenekler

Replaced thermal paste and now temps are way too high.

Block Image

I thought I would replace my thermal paste because it’s been 8 years and this laptop has not received any internal maintenance. I replaced the thermal paste, applied it evenly with an applicator, evenly screwed down the heatsink and pipe, and now im stuck thermal throttling when the computer boots, and the fan is going at full speed. I do not have the backplate on, but I don’t know why that would make a difference. I am panicking a bit now because I need this laptop to work for school tomorrow.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Pop off the heat sink and take a few pics so we can see your application of paste Adding images to an existing question

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

2 Yorum:

Yeah, it does look like the left side of the die was rather uncovered. I’ll add more paste there and get back when I’m finished.

tarafından

@bone apple tea - On the contrary! You have too much paste. Its oozed under the guard so your CPU SMT devices are covered! You'll need to lift the guard off hopefully with out breaking it. Use a soft tooth brush with isopropyl alcohol and very carefully clean off all of the paste. I personally find a fillable spray can holding isopropyl alcohol will do a better job as it can dig out the paste thats under the components.

tarafından

Yorum Ekle

Yanıtını ekle

bone apple tea sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 8

Her zaman: 239