While doing repairs I realized I had torn off the optical drive power supply cable socket from the motherboard. That's the white plastic thing with the metal parts. The metal pins are intact. Should I solder then back on? If so, do you have any tips?
Bu iyi bir soru mu?
İtibar: 48
5
1
I can’t see if the solder pads on the board are damaged or not, from the look of the pins you should be fine.
It won’t be a difficult job but always practise first if you aren’t sure of your abilities. Use a small amount of solder to help reflow the existing solder on the pins.
Bu yanıt yardımcı oldu mu?
Should I add solder to the pins or the board? And should I add solder to the sides of the plastic socket where the broken off metal is?
Sorry, haven't logged in in a while.
Small amount of solder to everything I think, but just enough to leave a very small coat. Solder the metal at the sides, that could be an earth connection.
Son 24 Saat: 1
Son 7 gün: 5
Son 30 gün: 7
Her zaman: 54
@voidemissary post some good pictures with your QUESTION showing what the damage looks like.
Adding images to an existing question
oldturkey03 tarafından