Eşyalarını Tamir Et Topluluk Mağaza

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Soru Tümünü görüntüle

Seçenekler

Faster way to remove loudspeaker

The loudspeakers of my iPhone 4 have very low sound. I want to replace the loudspeaker, I am looking at the ifixit guide and I am wondering if there is a faster way.

If I remove only the docking connector, and two screws holding the enclosure, will that be enough? Is it necessary to remove the logic board?

I have never disassembled the iPhone 4 yet and I was wondering if someone has tried this shortcut, or it is completely impossible.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
1 Yorum

I did it my way with total success :)

The replacement was much faster and easier than removing the logic board and I did not feel I put any pressure on the board.

Thanks for your help.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

You can slip it out that way you described. Take off the screws for at least the lower part of the logic board, that way it will give you more "wiggle room." It does put a little more stress on the logic board and you are prone to breaking off the metal prongs on the antenna. That's why we don't recommend doing it that way on our guide. But it can be done.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Thanks Scott, I will try and let you know if it worked or broke something in the process.

tarafından

Yorum Ekle

Yanıtını ekle

lantzero sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 796