Eşyalarını Tamir Et Topluluk Mağaza

The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal.

20 Soru Tümünü görüntüle

Seçenekler

Why is suction too strong on Dyson DC25?

I had to change the brush bar and now the suction from the base is too strong very hard to push over carpet. I have tried the brush bar reset button but it’s not making any difference any suggestions please?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

Turns out the red clip on the filter in the ball had broken off and had slipped to the right with the help of a knife I could remove that and then the filter. Put in our spare filter and it’s back to working well actually it’s better as the new brush has made it collect a lot more dust.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Seçenekler

I don’t think the suction has changed, a new brush bar will cause more drag. Try adjusting the carpet height control.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Thanks how do I adjust that?

tarafından

Yorum Ekle

Yanıtını ekle

Emma Pottinger sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 12

Son 30 gün: 85

Her zaman: 1,992