Eşyalarını Tamir Et Topluluk Mağaza

An air purifier with True HEPA filter manufactured by Brondell. It comes in black or white (P400-B or P400-W).

1 Soru Tümünü görüntüle

Seçenekler

Device does not reset or turn on - How to find spare parts?

We were given a broken Brondell (also branded Aktobis or Winair) air purifier. It stopped working when changing filters and Brondell doesn’t offer repairs or spare parts. [Edit: We followed all reset procedures suggested by the owner’s manual]. The device briefly turns on before turning off again. Resetting does not appear to work. There are no apparent damages to the boards (there are three, the main control board, the CO2 sensor and the user controls)

We have already tried replacing the power cord to no avail. We can’t find the problem, and can’t find spare parts that’d enable to switch and test the boards. Any recommendations?

Block Image

Block Image

Block Image

Block Image

Block Image

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

if you do not have a manual, go here:

https://www.brondell.com/media/wysiwyg/a...

follow directions which include resets.

For it to stop when the filters were replaced would indicate a replacement procedure error.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Hi! Thanks a lot for the help. We already tried everything in the owner's manual (as well as contacted Brondell, which indicated that there was "nothing to do about it"). Sorry, I should have said that in the initial post!

tarafından

Yorum Ekle

Yanıtını ekle

Emeline Brulé sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 8

Son 30 gün: 9

Her zaman: 169