Eşyalarını Tamir Et Topluluk Mağaza

Released September 21, 2018. Models A1920, A2097, A2098, A2100. Available as GSM or CDMA / eSIM or nano-SIM / 64, 256, or 512 GB / Silver, Gold, or Space Gray. (Pronounced "iPhone 10 S.")

398 Soru Tümünü görüntüle

Seçenekler

Screen will not wake after replacement.

I have just replaced the screen on a friends iphone xs. I removed battery first and followed the guide to the letter. When i first turn on the phone the screen comes on, i put in passcode and can use apps, surf the net everything. As soon as i lock the screen or it locks itself, then it will not turn back on. The phone still works as i can feel it vibrate and can soft reset it. After soft reset, the screen works again, until locked. Anyone else had this problem?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi, put the old screen back and see if problem is go away. So you know if it is a faulty screen you received or it is a other problem.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Hello. Yes i tried the old screen and that works fine, as it should. Never seen this problem before. Screen come on after boot and soft reset but just will not wake off button, tap or lifting the phone. I thought it must be the screen, just know there are so many issues when changing parts on apples. Many thanks Leslie

tarafından

Yorum Ekle

Yanıtını ekle

Trevor Webb sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 56