Hey everyone, I have this sensor for the remote control on a TV from Swedx (brand) I want to replace it, and couldn’t find any model or code on it so I can do a proper research, anyone know what is it? and if I can buy from ifixit or someplace else?
Bu iyi bir soru mu?
İtibar: 613
3
Do a search on make & model and “parts”. I’d also clean and reinstall it. Bare copper oxidizes and low level signals get corrupted. Also be certain as possible that the remote transmitter is issuing IR. I’ve never seen an IR remote receiver go bad, but Plenty of transmitters die for a variety of reasons. Another inexpensive option is to buy a universal remote that you verify has your make & model listed (remote mfgr website). Also carefully look for cracks in the flex ribbon conductors.
Most past this calls for electronic instruments and use knowledge.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 0
Son 30 gün: 0
Her zaman: 28
Hi @hovig,
Is this the IR sensor from the TV?
If it is, what is the model number of the TV?
It may be easier to try and find a service manual for the TV that hopefully has a parts list where the sensor board would be listed with a part number.
Given the number of wire tracks in the cable (5) it appears that there may have been another function as well. Was the TV power on/off button there as well? Usually IR sensors don't need that many wires.
jayeff tarafından