Ana içeriğe geç

The Samsung Galaxy Tab S 10.5 released in July 2014 is a 10.5” Android tablet with a 2560x1600 pixel resolution, 16GB of storage, and 8.0MP camera. Model numbers: SM-T800 (WIFI), SM-T805 (Cellular and WIFI)

100 Soru Tümünü görüntüle

Bricked after cache/data wipe?

Hello,

Galaxy Tab S 10.5

Initial problem - “kernel is not seandroid enforcing” on boot attempt

I used Odin3 to put original tar.md5 image which I downloaded with Frija. Odin3 did not report any errors.

Boot pattern changed but still did not boot.

I tried to use Odin3 again but it was only giving “RQT_CLOSE “ error on upload attempt.

I did “wipe data/factory reset” and “wipe cache”. It showed multiple red lines in output with “failed to mount cache” being one of them.

After that I can’t enter either download or recovery menu. The tablet screen remains black and flashes with a white screen with a few horizontal dark stripes once a minute. ( picture attached).

Block Image

I disconnected display cable and charged for 10 hours. Reconnected cable but it did not help. Replaced battery but no use.

Time to throw it in the garbage ?

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
2 Yorum

I would take out all of the parts except the screen and battery. Throw the screen away, and bring the battery to a battery recycling center.

tarafından

Andrew, to be fair I do not believe there is a problem with the screen. It worked before my actions in maintenance menu. I feel it is the system itself is bricked.

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

I would keep the device for spare parts and get another one.

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

moggerrus sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 152