Ana içeriğe geç

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3306 Soru Tümünü görüntüle
Soru Kapandı

iPhone 4 home button works poorly after a small water spill?

Hey all,

New to this site, can't believe a great site like this exists!

So here's my problem...

My girlfriend spilt water on her iPhone 4 (GSM) just so its clear.. about 4-5 months ago.

Ever since the water spill, the phone's home button does not work well.

What do I mean? - Well it does work, but only if you press on it quite hard, specifically the pressing has to target the center upper edge of the button. That is the only way it is functional at all. As you can imagine doing a "hard reset" is a HUGE pain in the butt, because you can never be sure if the home button is activated or not.

I was wondering if simply buying a new home button from this great looking site, along with any other necessary materials will be sufficient to fix this problem?

Well thats about it..

Looking forward to your answers,


Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

3 Cevap

Filtre ölçütü:

Replacing the home button should work for you.

My problem was similar. After almost a year of use, the iPhone 4 home button became less responsive. I had the phone sent for repair and moisture was detected inside the device. As the warranty was void, I decided to replace the button myself. It works like a charm now, responsive as on day one.

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

I got the same problem, where was the moisture found? On the home button, or on the sensor for the home button? Is this package enough? iPhone 4 Home Button Assembly


iPhone 4 Home Button Assembly Görseli


iPhone 4 Home Button Assembly


Bu yanıt yardımcı oldu mu?

Puan 0


No idea. All I know is the moisture sensor was triggered. This package should be enough. In case it turns out not to be, you could try replacing the dock connector as well.


Yorum Ekle

not working at o cant turn on after water

Bu yanıt yardımcı oldu mu?

Puan 0


If the issue started after water damage you probably only need to disassemble the phone and clean the contact points between the homebutton flex and the connector on the dock connector and clean the back of the button and the frame contact point. This fixes 90% of them.


Yorum Ekle
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 7,385