Ana içeriğe geç

50" Plasma TV by Sanyo released in 2007.

80 Soru Tümünü görüntüle

TV shutdown. No picture or sound.

I replaced all 7 fuses and reconnected the power. The TV powered on with audio on one channel, but no picture. The power board has a green flashing light and the left board has a solid green light. When the TV is first turned on there is a clicking sound. Can you offer any solutions?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

Hi @pzburgher,

Start with the no video troubleshooting flowchart from the service manual

You can also check the no power troubleshooting flowchart on p.41 to make sure that all the voltages are there and correct.

Bu yanıt yardımcı oldu mu?

Puan 1

1 Yorum:

the clicking sound is probably normal. Voltage supplied to the TV must stabilize b4 it is applied and the click is the time delayed relay.

tarafından

Yorum Ekle

Yanıtını ekle

Ron Brooks sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 36