Eşyalarını Tamir Et Topluluk Mağaza

Model M8541 / 5 or 10 GB hard drive / scroll wheel physically turns

29 Soru Tümünü görüntüle

Seçenekler

I think my iPod has gone senile

I have a 1st gen classic and when it is plugged in it gives me the file screen. However, when I try putting it in disk mode or debug mode it will freeze up on the apple logo and stay that way untill it either dies or I do a hard reset at which point it will go straight back to the file screen.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

@zaccpecc could be a hard drive issue. I suggest you go into diagnostics mode and run the checks. Let us know what you find out. For now, my prime suspect is the HDD or the firmware

  • 1st, 2nd, and 3rd Generations
    • Reboot iPod: Hold down the menu and play buttons.
    • Disk Mode: Immediately hold down the rewind and fast forward buttons as the iPod reboots. 1
    • Diagnostic Mode: Hold Rewind, Fast Forward, and Select buttons as the iPod reboots.
    • Non-default Firmware (only when the old ipodloader is installed): Hold Rewind after rebooting the iPod
    • from here

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

7 Yorum:

I've tried that and it just freezes at the apple logo and goes no further, I've tried a known working hard drive in it and had the same results. I've Eben tried getting into disk and debug mode with the hard drive taken out and had the same results as with it In.

tarafından

Have you tried a complete reset on it?

tarafından

What do you mean by a full reset?

tarafından

Like a restore through iTunes etc.

tarafından

How am i supposed to do that if it won't go into disk mode?

tarafından

2 tane daha yorum göster

Yorum Ekle

Yanıtını ekle

Zach peck sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 8

Her zaman: 114