Seçenekler

Display Temp Sensor Board

I am trying to fix an iMac 2010 EMC 2389 Display but the wires to the temp sensor board on the rear of the display have become disconnected. I can solder them back easy enough, but I cant seem to find the proper wiring diagram / schematic to ensure the correct polarity.

The board front has the markings ICT-Lanto and the rear has

94V_O DS1

E220742

marked on it. Can anyone help with which wire to solder to which output? Will post a photo.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır

Puan 1

Yorum Ekle

Gönderildi: 14 Oca 2022

Seçenekler

Fxguy1 the most inward connection on your logic boards temp sensor connector is the Positive and it is wire number one on your sensor board. The outer one is the Negative and connects to point number 2 on your board.

Bu yanıt yardımcı oldu mu?

Evet Hayır

Puan 2

1 Yorum:

@Fxguy1 I converted your comment to a separate question. That way you will get the right answer and lots of advise on how to further troubleshoot if necessary

oldturkey03 tarafından 14 Oca 2022

Yorum Ekle

iMac Intel 21.5" EMC 2389

Display Temp Sensor Board

1 Cevap

Yanıtını ekle