Ana içeriğe geç

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

906 Soru Tümünü görüntüle

Why is my screen black?

So my ipod nano classic works and all but the screen is black.. When i plug into my computer everything is there i just cant see anything on the screen because it went black.. I have tried resetting it and checked the brightness settings but everything is working... Need help.. Dont know if i should get a new screen for it..

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0
6 Yorum

place a flashlight on the screen at a sharp angle are you able to see the faint image of the menu's? If you do your backlight logic needs repairs that could be either the logic board backlight power circuit, the cable connection to the panel or the panel.

tarafından

I can see see everything that’s on it. If I put it under a light I can see all my music.. it’s just black.. I don’t know how to repair these things and I don’t know where to have it fixed? Can you suggest any places that repair them?

tarafından

@Steven&Brianna Wasko what exact model is your iPod?

tarafından

i have the ipod nano classic 160gb

tarafından

@lvtrkrgurl78 maybe an iPod Classic 160GB which would make it a 6th gen iPod Classic. No Nano with 160GB. Take a look at the back case, on the bottom. You should see an "AXXXX" let us know what that number is.

tarafından

1 tane daha yorum göster

Yorum Ekle

1 Cevap

Filtre ölçütü:
En Yararlı Yanıt

lvtrkrgurl78 A1238 is a iPod Classic 7th gen. The issue with your iPod is the backlight. It is possible that it failed on the display end. so I would start with replacing that. The problem you might be running into is that the backlight coil or filter on the logic board may have failed. that means it wont produce a backlight. There are no schematics etc. available for these iPods. WE would need some really good pictures of your logic board. Hopefully we can identify bad components etc. You would also need a multimeter and the ability to solder very small components on some circuit board.

Start with a new display and see what that shows you.

iPod Classic Display Replacement

Adding images to an existing question

iPod Classic Display Görseli

Kılavuz

iPod Classic Display Replacement

Zorluk:

Çok zor

30 minutes - 1 hour

iFixit Görseli

Kılavuz

Adding images to an existing question

Zorluk:

Çok kolay

2 - 5 minutes

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

Yanıtını ekle

lvtrkrgurl78 sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 15

Her zaman: 611