Eşyalarını Tamir Et Topluluk Mağaza

The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

319 Soru Tümünü görüntüle

Seçenekler

Dryer runs, no heat. Thermal Fuse ok. Gas dryer.- RESOLVED

Dryer runs, no errors. No heat, and no error codes.

Tested thermal fuse with a multi-meter, and it looks fine.

There is some slightly toasted lent at the bottom, but not a fire.

Are there guides for troubleshooting the gas solenoid or the igniter ?

Thank You

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
2 Yorum

Hi @garose ,

What is the model number of the dryer?

tarafından

The model number is 110.94821300

Type:  DADT-NAT-1206006-EL22

Thank you

tarafından

Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi @garose ,

Here's a video that shows how to test an ignitor in a dryer

The tech sheet for the dryer is Whirlpool part # LIT 8557311 but unfortunately I can't find it online. Having this would give the schematics and also the diagnostics, that would be more help.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Seçenekler

Figured it out.

There were enough spiderwebs inside, that it restricted fresh air flow.

So the flame from the burner was not pulling far enough down the draw tube to not land on the thermal sensor above the ignitor.

It was a fine layer of webs, so I just didn't notice them at first. But once wiped away, it works well once again.

Thanks for the help, sincerely !

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Garry sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 139