Ana içeriğe geç

A collection of guides and support to help with washer repair.

3487 Soru Tümünü görüntüle

bypass lid lock on hot point model HTW240? I have three wires red blue

what or where do I wire the wires to ? I have already took the locking Menckenism off and just have wires. I'm not sure which is the ground wire. I have three wires Red White and Blue. pleas help. laundry is piling up and I have 8 kids.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 0

1 Yorum:

I broke the little piece that goes to the square lock piece. So I want to bypass my laundry is really getting piled up and I worked such long hrs. Help me please. Hotpoint washer model HTW240ASK6WS. Thanks in advance!

tarafından

Yorum Ekle

1 Cevap

Filtre ölçütü:

@desireenbryan we would need to see what you see. Normally you just place a jumper between the wire from COM and the one labeled NC

Post some picture of where it was located, the part you took out and the wiring etc., with your QUESTION Adding images to an existing question

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

desireesnyder8187@gmail.com sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 24

Son 30 gün: 79

Her zaman: 1,052