Eşyalarını Tamir Et Topluluk Mağaza

Model A1502 / 2.6 GHz (Turbo Boost up to 3.1 GHz) or 2.8 GHz (Turbo Boost up to 3.3 GHz) dual-core Intel Core i7 processor with 4MB shared L3 cache.

494 Soru Tümünü görüntüle

Seçenekler

Lost Display after replacing MagSafe 2 DC-In Board

Hi All ,

I followed the below instructions step by step and changed the dc board successfully and reconnected everything back

MacBook Pro 13" Retina Display Mid 2014 MagSafe DC-In Board Replacement

However when I powered it back on I can see it is charging again however it just displays a black screen and no display. Keyboard light comes on as well and the apple logo light on the back lid also turns on. Not sure what is wrong ? It has been charging for more than 15 minutes and still no joy. Anyone able to help solve or identify the issue .

Thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Sounds like the display cable is not seated or got damaged. Follow the guide back to Step 7 unplug the cable and take a nice tight picture of the connector end of the cable and a second on of the logic board connector and post them here for us to see.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0
Yorum Ekle

Yanıtını ekle

Kaleem sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 5

Son 30 gün: 7

Her zaman: 22