Eşyalarını Tamir Et Topluluk Mağaza

Repair and disassembly guides and support for dish washing appliances.

707 Soru Tümünü görüntüle

Seçenekler

LG Dishwasher LG8874ST snowflake light keeps flashing even when full

rinse aid full but low rinse aid snowflake keeps flashing. sometimes you can open and close the door a few inches rapidly to slosh the rinse aid around and the light would go off, that solution is not working anymore. BUT it is using lots of rinse aid no matter what setting it is set to dispense at, So it's not clogged. Refilling evey other wash cycle, snowflake constantly flashing,

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 2
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi @speedy20741
Did you mean an LG LD8874ST?

Here's an image of the wiring diagram seen on p.65 of the service manual that may help.

Block Image

(click on image)

Disconnect the power to the dishwasher, remove the harness cable plug from the control board's RD6 connector and then connect an Ohmmeter across pins 1 and 2 (yellow and blue wires) of the cable harness plug and test if the switch is operated when it shouldn't be.

If there is a problem with the switch inside the rinse aid dispenser, search online for MCU61861001 (examples only) to find suppliers that suit you best.

To remove the dispenser see p.19 of the manual.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Speedy sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 19

Son 30 gün: 82

Her zaman: 1,704