Eşyalarını Tamir Et Topluluk Mağaza

Nintendo's upgraded version of the Nintendo 3DS. It features bigger screens, longer battery life, better pixel density, and a better design.

413 Soru Tümünü görüntüle

Seçenekler

Liquid in the digitizer

hey,

so my kids somehow managed to get water inside the digitzer, i tore the device down and its solely the digitizer from the inside, i have let it sit with some silica gel for 10 hours already but there is no sign of the moisture disappearing, i was wondering if i could heat it up with a heat gun/hair dryer so it evaporates faster

thanks

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 1
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski

Seçenekler

Hi

I wouldn’t recommend heating the display as you will most likely burn the glue in between the layers

Unfortunately you may have to buy a new one unless you want to take a gamble

You could also try and disassemble the backlight as that’s where most of the water will gather but please do this at your own risk

Hopefully this helps

Any questions please ask

Thanks:-)

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

4 Yorum:

the thing is, its not the LCD its the digitizer i was wondering if i could heat it up

tarafından

@hajis

If you use heat below 120deg c you might get away with it

Probably needs replacing though

I would attempt at your own risk:-)

tarafından

alright thank you ill try my luck

tarafından

@hajis

Good luck!

Btw I meant 120deg c not 12 XD

tarafından

Yorum Ekle

Yanıtını ekle

hajis sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 35