İtibar: 11
1
I lost some of my screws to my iPhone during its battery replacement, most notably, the 1.2 and 1.6mm screws holding the screen cables in place. Will this cause trouble down the line or am I good to go? Just asking so I do not have to disassemble it to reconnect those wires, as those cables have been a nightmare to get working.
Bu iyi bir soru mu?
İtibar: 1,6b
6
8
it's doable, but not recommended. i definitely do not recommend it.
every screw and bracket serves a purpose and keeps components or connectors in their proper place.
if this is a one-time repair, i'd suggest checking out mobile sentrix, injured gadgets, wholesale gadget parts, or even ebay, to find a complete screw set for the model phone you need. plug your gaps, then keep the extra screws as spares for future repairs.
good luck
Bu yanıt yardımcı oldu mu?
Thank you! I will look into these stores to find screw sets.
İtibar: 551
9
8
13
Ideally they'd be better replaced as a knock or drop further down the line could loosen a connector.
Bu yanıt yardımcı oldu mu?
İtibar: 479,7b
35
329
971
When you forget screws you put your gear at greater risk of damage. As the screws help unitize the physical structure so it won’t warp or bend or allow liquid and dust from entering.
So I personally would put all the correct screws back in if I want the phone to last as long as possible.
Bu yanıt yardımcı oldu mu?
İtibar: 617
9
1
Technically, you could do this, however as the people above me said, it could damage the phone. I tend to leave some screws out of the things that I fix, however they aren’t phones.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 1
Son 7 gün: 19
Son 30 gün: 70
Her zaman: 309
