Eşyalarını Tamir Et Topluluk Mağaza

A sports car made by Toyota from 1992-1995. It has a 1.5 liter inline 4-cylinder with a 5-speed manual or 4-speed automatic transmission.

5 Soru Tümünü görüntüle

Seçenekler

Can I replace rear 6 ohm speakers with 4 ohm?

I'm replacing the rear speakers in my car and the factory ones say 6 ohm. However its much easier to find 4 ohm. I'm looking at some cheap ones on amazon rated for 30rms, the original say 15w on the back so I assume that is the rms for the factory ones. Could this damage the radio (still going to be using the factory stereo) or should I be safe? I don't know anything about speakers.

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi @carsman248

Not a good idea.

There is a risk of hardware damage to the amplifier in the stereo system. Connecting speakers which have a lower impedance than what the amp is rated for, may cause damage to the amp.

At the very least the sound will be distorted.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

2 Yorum:

Then what should I do? Would it be better to use 8 ohm? Or do I have to find some 6 ohm?

tarafından

@carsman248

Find some 6 Ohm speakers.

Using 8 Ohm won't be good either.

It mightn't damage the amp but the sound won't be good.

tarafından

Yorum Ekle

Yanıtını ekle

Maxwell sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 19

Her zaman: 247