Eşyalarını Tamir Et Topluluk Mağaza

Guides and repair information for washing machines produced by Samsung, a South Korean engineering and technology company.

103 Soru Tümünü görüntüle

Seçenekler

No hot water WW80M645OPX/EU samsung qdrive washing machine

Samsung

Block Image

washing machine has no hot water. I have tested thermistor it appears fine. ohms resistance drops with hand heat. element is fine 2.2 ohms but when on washing cycle no hot water is created ive attached crocerdial clips to power input on element no voltage detected on terminal on heat part of cycle . I have replaced pcb board b dc92 02140a note no error coded shown on machine. I am out of ideas

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

2 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

in the end it was the wiring loom i had to strip down to locate and bridge broken wires.movement between drum and loom. I hope it helps others

Block Image

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

@philippric92934 and that is the way to fix things :-) Great job and just in time to finish the weekend laundry!

tarafından

Yorum Ekle

Seçenekler

Have you checked the filter element in the hot water hose?

If it is not that, then it is likely a bad water valve. There are 2. One for hot and one for cold.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 0

1 Yorum:

Uk machines use a single cold feed in the end it was a wiring loom issue. after stripping down the loom part of the thermistor circuit in the loom had snapped causing open circuit

tarafından

Yorum Ekle

Yanıtını ekle

Philip Price sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 4

Her zaman: 58