Eşyalarını Tamir Et Topluluk Mağaza

Repair documentation for the updated Sony PlayStation 5 DualSense controller. Model number: CFI-ZCT1W FCC ID: AK8CFIZCT1A

26 Soru Tümünü görüntüle

Seçenekler

How to fix a motherboard tear issue.

Hi all, still learning so forgive my vagueness on this one but here I go.

I have a ps5 controller that I repaired yesterday and during the repair a piece of motherboard came off. I assumed it was only the top coat of paint. Testing it today everything works but my L3 button which nothing seems to be wrong with the anolog since its brand new.

Anyway I have this tiny piece of exposed area which I assume is the issue here. Is there any way I can fix it? If so how and what do I need

Thanks in advance :)

Block Image

Block Image

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
Seçilen Çözüm

Seçenekler

that is a piece of copper. If something came off, the circuit is open. If it is a small break you may be able to bridge it with a solder blob. If it is bigger, you will have to bridge it with a fine piece of wire, like 28-30 gauge.

Since it was damaged, that may indicate that the PCB is very delicate, so further soldering must be done quickly at the right temp.

Scrap off enough of the solder mask with an Exacto knife to solder to, then tin the ends of the traces. If the solder bridges them you are good to go. If not, tin the wire, lay the wire across it and heat. Use a long piece of wire so you can hold it in position, then cut it when soldered.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1

1 Yorum:

Hey thanks for the feedback, I've added another image showing the damage. Do you think some solder would fix this?

tarafından

Yorum Ekle

Yanıtını ekle

David Brooks sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 5

Son 7 gün: 6

Son 30 gün: 59

Her zaman: 327