İtibar: 1
1
Having trouble removing the main top panel of Maytag washer MVW7232HWO. I removed the 3 screws in the back of the washer and then tried to lift and pull the main panel forward without success. It will not budge. Please help
Bu iyi bir soru mu?
İtibar: 463,3b
11
374
1,5b
Bu yanıt yardımcı oldu mu?
I’m still having trouble sliding the top panel forward enough to lift it. I tried to pry it with a screwdriver and it moves somewhat, but not enough. I applied lubricant, and even hit the back with a rubber mallet without success. What do I do now?
Did you remove the screws that hold the cover onto the back of the control panel?
Yes, I removed the 3 screws
The first technician that I spoke with from ifixit told me there was a manufacturer recall for this condition (removing the top cover).
I meant all the other screws along the bottom edge of the back panel that hold the back panel onto the control panel.
In all of the videos I checked they have been removed as well even though the back panel is still on.
Best I can count is that there's 3 possible 4 plus the 3 that you removed.
Son 24 Saat: 14
Son 7 gün: 74
Son 30 gün: 350
Her zaman: 1,180
