İtibar: 13
2
1
On my Frigidaire FHSS2611LWG side by side refer the freezer is getting too cold and the refer part is not cold enough! Getting error code of H1 on the refer side! Compressor and fan are running in the back of fridge but no cold air seems to be coming from the air vent in. Any ideas?
Bu iyi bir soru mu?
İtibar: 453,1b
11
368
1,4b
Hi @junemtnman
Did you mean an FFHS2611LWG model?
A Hl error code is indicating that the temp in the refrigerator is >55°F which is what you know already.
Here's the service data sheet for the refrigerator.
Run the diagnostics as described and check what errors occur.
If you find the problem and it is a part that needs replacing, here's a parts list that is useful.
Locate the wanted part to find the part number that is listed with it and then search online for the part number only to find suppliers that suit you best.
If you need more help, post back here with any information from the diagnostic tests.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 1
Her zaman: 23
1 Yorum
Compressor coils are all clean by the way!
junemtnman tarafından