washer willnot respond but drains water it self and have no ligths
mvwb865gw1
is there a reset button
Bu iyi bir soru mu?
Puan
0
850721
1 Cevap
En Yararlı Yanıt
İtibar: 463,3b
11
374
1,5b
Here's the tech sheet for the washer that may help.
Go to p.2 to see how to check if the diagnostic LED on the control board is flashing, On steady or Off - see Diagnostic LED Main Control (ACU) section
Depending on the results go to p.14 TEST #1: Main Control (ACU) to see how to proceed further.
Be safety aware as there is potentially lethal AC voltage present on the control board
Bu yanıt yardımcı oldu mu?
Puan
1
1 Yorum
This question was migrated from https://meta.ifixit.com/Answers.
iRobot tarafından