Eşyalarını Tamir Et Topluluk Mağaza

Repair guides and support for top and front loading Whirlpool brand washers.

431 Soru Tümünü görüntüle

Seçenekler

Whirlpool Cabrio WTW8500DC5 giving multiple error codes

My Whirlpool Cabrio top load washer is giving multiple error codes. The first was LF. I changed the water inlet valve and it fixed it for 2 days. Then it started showing F8E1 and F0E3. After replacing the water inlet valve, it was going thru a cycle and started making an electrical “buzzing” like something was straining or stuck. Then started flashing F8E3. Any suggestions? Does this sound like a control board problem?

Bu soruyu yanıtla Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Evet Hayır
Puan 0
Yorum Ekle

1 Cevap

Filtre ölçütü:
En Faydalı En Yeni En eski
En Yararlı Yanıt

Seçenekler

Hi @chadmeuir

Here's the tech sheet for the washer that may help.

Go to p.10 to view what to check when an F8 E1 and F8 E3 error occurs.

If there's a faulty part that needs replacing, here's the part list that is useful.

When you have located the wanted part in the list, you'll find that the manufacturer's part number is listed with it. Search online for the part number only, to find suppliers that suit you best.

Bu yanıt yardımcı oldu mu?

Evet Hayır
Puan 1
Yorum Ekle

Yanıtını ekle

Chad Meuir sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 24

Her zaman: 24