Ana içeriğe geç

Model No. A1367 / 8, 16, 32, or 64 GB capacity

915 Soru Tümünü görüntüle

broken iPod screen fell off

okay to start i have droped my ipod down the stairs the screen fell off and the backplate is messed up.Is it possibl to fix this type of damage if soo how much would it be?Please please please help me.

Yanıtlandı! Cevabı görüntüle Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 4
2 Yorum

The top part where the camera is fell off of mine. Does anyone know how to fix it? The screen doesn't work or anything!

tarafından

my screen broke off and i dont know how to put it back on

tarafından

Yorum Ekle

3 Cevap

Filtre ölçütü:
Seçilen Çözüm

You can do the repair yourself. The guide is available right here. Just familiarize yourself with it and do take your time. Follow the steps and be organized. The display assembly can be purchased from here When you talk about the backplate, and you should refer to the back of the iPod, that will be a bit trickier. Here is the teardown, it is not a guide, but will show you what you are up against if you want to replace it. If you are not sure if you want to do this by yourself, do a search with Google and see what the rate is for such a repair. Going rate seems to be around $90 for the repair. Hope this helps, good luck.

iPod touch (4th Gen) Screen Görseli

Ürün

iPod touch (4th Gen) Screen

$29.99

iPod Touch 4th Generation Görseli

Kılavuz

iPod Touch 4th Generation Teardown

Zorluk:

Orta

iPod Touch 4th Generation Front Panel Görseli

Kılavuz

iPod Touch 4th Generation Front Panel Replacement

Zorluk:

Zor

2 hours

Bu yanıt yardımcı oldu mu?

Puan 1
Yorum Ekle

You can buy a special kit online that will help you replace. Then look on YouTube for the guide to replace

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Replace the display and the bottom case. You may want to replace the battery, too. It is easier to assemble an iPod touch than perfectly disassemble and reassemble one. So on your old iPod, simply cut the battery and button control cables. Put new ones into the new case first, then put the logic board into it and solder the cables

Bu yanıt yardımcı oldu mu?

Puan 0
Yorum Ekle

Yanıtını ekle

Vicente Martinez sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 11

Her zaman: 7,483