İtibar: 13
1
I got a catch when the wood piece slipped when I was making a 45 degree cut. The blade no longer runs in the plate groove and there is some binding . I cannot see how this is adjusted back to square. HELP!
Bu iyi bir soru mu?
İtibar: 549,3b
11
423
1,6b
Hi @donh23438
Here's the page from the service manual that shows how to adjust the angle of the blade that may help.
Bu yanıt yardımcı oldu mu?
Son 24 Saat: 0
Son 7 gün: 4
Son 30 gün: 16
Her zaman: 168
