Released April 2010 / 2.4, 2.53 GHz Core i5 or 2.66, 2.8 GHz Core i7 Processors

567 Soru Tümünü görüntüle

Computer got wet, screen is dead

Hey all,

Two days ago I dropped my MacBook pro a1286 into a rain puddle. After turning it on (like an idiot) I discovered it was working perfectly. I shut it down and let it dry but once again (like an idiot) turned it on after an hour. Computer went on but the screen is dead.

Now it is 60 hours later and the computer still goes on. When I plug an external screen into it it works like a charm. So obviously when I turned the computer on I killed my screen.

Wanted to know if I could replace the screen myself or if I should try replacing the cable? Has anyone replaced a screen on one these guys and if so how and using what resources? Also let me know if the screen not going on is an indicator of a larger problem. Feel free to call me a jerk for turning it on, but also please give advice!

Thanks,

Milo

Yanıtlandı! View the answer Ben de bu sorunu yaşıyorum

Bu iyi bir soru mu?

Puan 1

Yorumlar:

There are 19 Macs in the A1286 model line. Please give us the last three figures of your serial number to narrow it down. Thanks

tarafından

The last three digits are agz.

tarafından

Yorum Ekle
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Cevap

Filtre ölçütü:
Seçilen Çözüm

First stop turning it on and get the battery out and dry it.

Apple MacBook Pro "Core i7" 2.66 15" Mid-2010 Specs

Identifiers: Mid-2010 15" - MC373LL/A - MacBookPro6,2 - A1286 - 2353*

Use this guide and clean it: Electronics Water Damage

After you've done all this, then give it a try and get back to us with anything that's not working properly.

Bu yanıt yardımcı oldu mu?

Puan 3
Yorum Ekle

Yanıtını ekle

Milo sonsuza kadar minnettar olacak.
İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 19

Her zaman: 5,391