My GE Profile door ice maker stopped dispensing ice. I replaced the auger motor. Still does not turn the auger. The ice maker still makes ice and the flap on the door dispenser shut opens and closes as it should.
What is my next troubleshooting step ??
Bu iyi bir soru mu?
İtibar: 521,2b
11
398
1,5b
Hi @tony94671
Here's the mini manual for the refrigerator.
Enter the service diagnostics as described by the guide and check if any error codes are shown.
There's a Fa i l u r e Co d e Def i n i t i o n table (codes 600-699) for the ice maker showing what the codes mean.
There's also a Door wiring diagram on p.3 (left side) showing the wiring connections for the ice maker that may also help.
Don't know your model but assume that the ice maker is in the refrigerator door and not the freezer?. If it is run service diagnostic test 00 66 FF Door Icemaker Rake Motor. (if it is in the freezer then run test 00 59 FZ Icemaker Rake Motor Test) to see if it works or not.
Note FF = refrigerator section, FZ = freezer section
Bu yanıt yardımcı oldu mu?
I'll give it a try - Thanks
Son 24 Saat: 0
Son 7 gün: 1
Son 30 gün: 9
Her zaman: 85
2 Yorum
Hi @tony94671
What is the full model number of the refrigerator?
jayeff tarafından
The Model number is PFE28KSKLSS
Tony tarafından