7. Setting up Webcam with Timelapse
Tahmin yok
Orta
Topluluk-Katkılı Kılavuz
-
-
If you used the latest version of Mainsail(v7.0) skip this next command.
-
Regardless if you used the latest version or not run
-
bash ~/moonraker-timelapse/install.sh
-
Make sure printer.cfg calls the timelapse config
-
[include timelapse.cfg]
-
Make sure the [timelapse] section is uncommented in moonraker.conf
-
Neredeyse bitti!
Bitiş Çizgisi
