KLH Speaker Tweeter and Driver Replacement

Mark Lee Hensley ve 9 diğer katkıda bulunanlar

En son August 17, 2022 tarihinde güncellendi

15 - 25 dakika

Kolay

Giriş

Use this guide to replace the tweeter and driver of your KLH bookshelf speaker to make it last longer. Remember to disconnect the speaker before proceeding with any repair.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

iFixit bu bağlantılar üzerinden satın aldığınızda komisyon kazanır.

Adım 1 Tweeter and Driver

KLH Speaker Tweeter and Driver Replacement, Tweeter and Driver: adım 1, 1 resimden 1.

Remove the front speaker mesh to expose the speakers. The mesh will lift off without the use of tools.

Düzenle

Adım 2

Once the mesh is removed, begin to remove the screws securing the small upper speaker/tweeter with a #1 Phillips head screwdriver.

Düzenle

Adım 3

Once the screws have been removed, pry out the small upper speaker with an opening tool.
Take care not to damage the speaker’s wooden body while prying the speaker out.

Düzenle

Adım 4

After you have removed the speaker, disconnect the red and brown wires from the speaker.
You might require needlenose pliers to do this.

Düzenle

Adım 5

KLH Speaker Tweeter and Driver Replacement: adım 5, 3 resimden 3.

Remove the speaker from its plastic bezel using a #1 Phillips head screwdriver.

Düzenle

Adım 6

For the larger bottom speaker, the same steps will be taken to remove the speaker.
Remove the four screws securing the speaker.

Düzenle

Adım 7

Once the screws are removed, remove the speaker by either prying up from the top, or pushing the speaker through by pushing on the bottom of the speaker.

Düzenle