/
Tezgahım

Cihazların için kılavuz, parça ve yanıtlara hızlı erişim edin

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Üye Ol
Giriş Yap
Dünyanın en büyük onarım topluluğuna katılın
Parçalar
KılavuzlarCevaplar
Düzenle
Panasonic KX-E603 Stepper Motor Replacement

Panasonic KX-E603 Stepper Motor Replacement

Lindsay Stratis

Lindsay Stratis ve 4 diğer katkıda bulunanlar

En son June 24, 2015 tarihinde güncellendi

15 - 20 dakika
Orta

Giriş

1. adıma git

This guide will demonstrate how to replace the stepper motor on your typewriter, step-by-step.

Neye ihtiyacın var

Aletler

  1. Panasonic KX-E603 Stepper Motor Replacement, Case: adım 1, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement, Case: adım 1, 2 resimden 2.

    • Flip the typewriter to expose the bottom body panel.

    • Be careful to not damage the top surface of the typewriter when you rest it upside-down.

    Düzenle

  2. Panasonic KX-E603 Stepper Motor Replacement: adım 2, 1 resimden 1.

    • Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

    Düzenle

  3. Panasonic KX-E603 Stepper Motor Replacement: adım 3, 1 resimden 1.

    • Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.

    • Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

    Düzenle

  4. Panasonic KX-E603 Stepper Motor Replacement: adım 4, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 4, 2 resimden 2.

    • Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.

    • Remove the two 19 mm screws using a Phillips #2 screwdriver.

    Düzenle

  6. Panasonic KX-E603 Stepper Motor Replacement: adım 5, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 5, 2 resimden 2.

    • Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

    Düzenle

  7. Panasonic KX-E603 Stepper Motor Replacement: adım 6, 3 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 6, 3 resimden 2. Panasonic KX-E603 Stepper Motor Replacement: adım 6, 3 resimden 3.

    • Remove the roller wheel adjustment knobs by pulling firmly outward.

    • Both black knobs must be removed in this step.

    Düzenle

  8. Panasonic KX-E603 Stepper Motor Replacement: adım 7, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 7, 2 resimden 2.

    • Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

    Düzenle

  9. Panasonic KX-E603 Stepper Motor Replacement: adım 8, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 8, 2 resimden 2.

    • While both spring levers are depressed, lift up with both hands to remove the roller wheel.

    Düzenle

  10. Panasonic KX-E603 Stepper Motor Replacement: adım 9, 3 resimden 1. Panasonic KX-E603 Stepper Motor Replacement: adım 9, 3 resimden 2. Panasonic KX-E603 Stepper Motor Replacement: adım 9, 3 resimden 3.

    • Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

    Düzenle

  11. Panasonic KX-E603 Stepper Motor Replacement, Stepper Motor: adım 10, 2 resimden 1. Panasonic KX-E603 Stepper Motor Replacement, Stepper Motor: adım 10, 2 resimden 2.

    • Do not remove the screws fully from the stepper motor. Just unscrew them enough to allow the stepper motor to come loose. Removing them all the way can cause damage to the motor.

    • The stepper motor is located on the left when looking from the rear of the typewriter. Rotate the typewriter so that the stepper motor is facing you.

    • While loosening the screws, use your finger to brace the corresponding nuts found on the opposite side of the stepper motor mounting bracket.

    • Using a P1 screwdriver, unscrew the top right and bottom right integrated #3 screws from the back of the stepper motor.

    Düzenle

  12. Panasonic KX-E603 Stepper Motor Replacement: adım 11, 1 resimden 1.

    • Remove the stepper motor by pulling it straight out.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order using a working stepper motor.

Yazar

4 tane daha katılımcı ile

Lindsay Stratis

Üyelik tarihi: 04/08/15

491 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 17-1, Forte Spring 2015 Cal Poly, Team 17-1, Forte Spring 2015 üyesi

CPSU-FORTE-S15S17G1

4 Üyeler

6 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 3

Son 30 gün: 5

Her zaman: 519