Eşyalarını Tamir Et Topluluk Mağaza

Roku XD 2050X Ethernet Port Replacement

Giriş

In this guide we will show you how to replace the Ethernet port on your Roku XD 2050X. To complete this guide, you will need to disassemble your device and use a soldering iron to replace the port.

Neye ihtiyacın var

  1. Roku XD 2050X Ethernet Port Replacement, Case: adım 1, 3 resimden 1. Roku XD 2050X Ethernet Port Replacement, Case: adım 1, 3 resimden 2. Roku XD 2050X Ethernet Port Replacement, Case: adım 1, 3 resimden 3.

    • Ensure the Roku XDis unplugged.

    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Turn the device upside down.

    • Remove the two rubber pads using a plastic spudger.

    Düzenle

  2. Roku XD 2050X Ethernet Port Replacement: adım 2, 2 resimden 1. Roku XD 2050X Ethernet Port Replacement: adım 2, 2 resimden 2.

    • Remove the two Phillips #1 9mm pan-head screws.

    Düzenle

  3. Roku XD 2050X Ethernet Port Replacement: adım 3, 3 resimden 1. Roku XD 2050X Ethernet Port Replacement: adım 3, 3 resimden 2. Roku XD 2050X Ethernet Port Replacement: adım 3, 3 resimden 3.

    • Insert spudger between upper and lower frame underneath the port access.

    • Guide spudger around to loosen upper and lower frame to pry frame apart.

    • Gently remove upper frame.

    Düzenle

  5. Roku XD 2050X Ethernet Port Replacement: adım 4, 2 resimden 1. Roku XD 2050X Ethernet Port Replacement: adım 4, 2 resimden 2.

    • Remove the two Phillips #1 8mm pan-head screws.

    Düzenle

  6. Roku XD 2050X Ethernet Port Replacement: adım 5, 1 resimden 1.

    • On the side of the board opposite the ports, find and tilt back the tab securing the board in place.

    • Lift the motherboard out of the lower frame.

    Düzenle

  7. Roku XD 2050X Ethernet Port Replacement, Ethernet Port: adım 6, 1 resimden 1.

    • Desolder the 8 contact points.

    • For help with soldering view the iFixit soldering guide.

    Düzenle

  8. Roku XD 2050X Ethernet Port Replacement: adım 7, 1 resimden 1.

    • Use pliers to pinch the two anchor points and gently press them through the board to separate ethernet port.

    • Remove the Ethernet port from board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

William

Üyelik tarihi: 01/30/15

1.603 İtibar

10 adet Kılavuz yazıldı

Rozetler: 19

+16 tane daha rozet

Ekip

University of Kentucky Louisville, Team 1-6, Rountree Winter 2015 University of Kentucky Louisville, Team 1-6, Rountree Winter 2015 üyesi

LOUISVILLE-ROUNTREE-W15S1G6

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 3

Son 30 gün: 10

Her zaman: 1,105