Xbox One Stereo Headset Speaker Replacement

Shannon Prouty ve 2 diğer katkıda bulunanlar

En son June 18, 2015 tarihinde güncellendi

15 - 20 dakika

Zor

Giriş

If either speaker in the headset stops playing sound, is much quieter than the other, or produces hissing and crackling noises, then it may be damaged or broken. Removing the broken speaker is fairly simple.

Installing a replacement, however, will require knowing how to splice wires together. Wire splicing requires wire strippers, soldering tools, and either heat shrink tubing or electrical tape. This guide will show you how to remove the existing speaker and indicate which wires need to be spliced.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

Adım 1 Speaker

Xbox One Stereo Headset Speaker Replacement, Speaker: adım 1, 1 resimden 1.

Firmly grip the ear pad and the plastic back plate underneath. With your other hand, grip the back of the speaker casing.
Do not grip the back of the speaker by the headband. Twisting this connection will break the headphone off the headband.
With the ear pad facing you, push down on the back plate and turn counter-clockwise to unlock the prongs holding it in place. The back plate will only rotate about 1 cm.

Düzenle

Adım 2

Lift the back plate (with the ear pad attached) straight up from the speaker.
This should be very easy to do. If it doesn't come off easily, then the plate isn't fully rotated.

Düzenle

Adım 3

Remove three 7 mm Phillips #00 screws holding the speaker in place.

Düzenle

Adım 4

Carefully open the back casing, exposing the speaker wires.

Düzenle

Adım 5

Use wire cutters to cut the blue and black wires from the headset close to where they are spliced to the red and black wires from the speaker.
Splice the headset wires to the corresponding replacement speaker wires.
Black connects to black, red connects to blue.
Although soldering isn't necessary when splicing wires, doing so creates a more reliable connection.