Giriş Geçmişi: Meta Quest 2 Power Button and LED Board Replacement

Cihaz	Meta Quest 2
Type	replacement
Thing	Power Button and LED Board
Title	Meta Quest 2 Power Button and LED Board Replacement
Introduction	This guide shows how to remove and replace the power button and LED board for your Meta Quest 2. The power button and power LED are mounted on a small, modular board. The procedure requires extensive disassembly of your headset. If your battery is worn, consider taking this opportunity to replace it—it's normally hard to reach, but is [guide|169153|easily accessible during this repair|stepid=358587|new_window=true]. ***Note:*** You'll need a long PH00 bit or a dedicated PH00 screwdriver to remove some recessed screws.
Time Required Min	1 saat
Time Required Max	2 saat
Imageid	Önce Sonra
Difficulty	Moderate
Conclusion	***To reassemble your device, follow these instructions in reverse order.*** Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [https://www.ifixit.com/Answers/Device/Meta_Quest_2|Answers community] for help.
Author	Arthur Shi
Public	Hayır

Kılavuz Ön Koşulları

• #1, empty idi, ancak şu anda How to Turn Off Your Meta Quest 2.
• #2, empty idi, ancak şu anda Meta Quest 2 Facial Interface Replacement.
• #3, empty idi, ancak şu anda Meta Quest 2 Eyepiece Trim Replacement.
• #4, empty idi, ancak şu anda Meta Quest 2 Front Cover Replacement.
• #5, empty idi, ancak şu anda Meta Quest 2 Battery Disconnect Prereq.
• #6, empty idi, ancak şu anda Meta Quest 2 Front Antenna Assembly Replacement.
• #7, empty idi, ancak şu anda Meta Quest 2 Fan Assembly Replacement.
• #8, empty idi, ancak şu anda Meta Quest 2 Heat Sink Replacement.
• #9, empty idi, ancak şu anda Meta Quest 2 Motherboard Replacement.
• #10, empty idi, ancak şu anda Meta Quest 2 Screen and Lens Assembly Replacement.

Aletler

İşaretler

Adımlar

Adım #: 1

Önce

Sonra

Adım #: 2

Önce

Sonra